*All colors shown are intended to show the approximate color of the finish, choices, and ranges of color. Dry pigment colors achieved after 2 coats of a color enhancing clear coat sealer has been applied. DO NOT use this chart for final color selections. Final colors are affected by site conditions and installation procedures dictated by the site conditions. Finish Line and PFC recommend choosing final colors from a cured sample or by samples provided in the field.

Limited Lifetime Adhesion Warranty

PFC Warranties that any job performed by PFC is complete in workmanship and quality. If a product should fail due to improper application or the mistake of PFC, the company warranties the correction of the issue if the problem is deemed to be caused by improper application. This warranty does not cover wear from use and it does not cover damage caused by others. This warranty is valid for the lifetime of the floor if the Hydrostatic Pressure does not exceed 8PSI. No other warranties suggested or implied. All product & Manufacturer warranties are stand alone warranties and have no connection to the PFC warranty!

See larger color samples at bottom of page.



The Corporate Shop option is 1/8″ or 1/16″ Flake Blend option that is broadcast 100% to rejection into 100% Solid Epoxy creating a 15-18Mil base coat. This base coat and flake size of the Corporate Shop option provide smaller aggregate look to the 1/4″ size options available in the Checkered Flag option. There are more flakes per square foot applied in this option creating a slightly thicker floor. This option like the Checkered Flag Options provide excellent chemical and abrasion resistance and will not Hot tire track off or peel off.

If you’re ready for epoxy garage flooring in Wetumpka, Birmingham, Auburn, Opelika and Montgomery, AL areas, give us a call for a free epoxy flooring quote!

Our Service Areas



  • Birmingham
  • Clanton
  • Montevallo
  • Alabaster
  • Pelham
  • Hoover


1/8″ Flake Option

1/16″ Flake Option

All Checkered Flag Color Options are Available in 1/8″ & 1/16″